Errata
We do our best to ensure that all our patterns are correct before these are published. However, mistakes do sometimes happen. Below you will find any changes we have made to our current printed patterns and the date this update took place.
If you’re having problems with any of our patterns, find an error which is not listed here or would like a replacement pattern for any of those listed in the errata section below please get in touch.
ALPINE
Amended 7th March 2025
Step 5 onwards should read:
5. Slst in first st (pm). Blslst in next st, then bldc in every st up to and including body marker. Blslst in final 15st. Ch1, tighten, turn.
6. Repeat steps 1 to 5 until hat is correct size, ending with step 3 on the final repeat. (Approx 10 or 11 further repeats. This will be stretchy.)
7. Bring the starting edge of the hat up in front of the current working edge and line up the sides, so the cast on edge will be towards you and working edge away from you.
8. Insert the hook into the front loop of the cast on edge and back loop of the working edge. Yo, pull a loop through all loops on the hook (i.e. a slst). Try to keep this loose and even as with previous rows.
9. Repeat this process all the way up the edge of the hat - when you reach the decreases, insert the hook into the row end and following stitches on the working edge as detailed in step 4.
10. When you reach the end, cut the yarn leaving a long end and pull through the final stitch.
11. Thread the yarn end onto a darning needle, and insert into each of the row end turning chains (these will look like little bumps). Pull this tight to close the top of the hat. Repeat to secure.
12. Weave in all ends. Turn this out to the right side to wear.
ALTO
Amended 19th Oct 2022
Crown step 4 should read:
4: A - Ch1, dc in the first st, ch3 (counts as a tr and ch1), tr in same st, [tr, ch1, tr] in next chsp to end, changing colour to yarn B on the last yo of the round which finishes the final tr. (48tr’s with 24chsp)
Previously
4: A - Ch1, dc in the first st, ch3 (counts as a tr and ch1), tr in same st, [tr, ch1, tr] in next chsp to end, changing colour to yarn B on the last yo of the round which finishes the final htr. (48tr’s with 24chsp)
Body step 1 should read:
1: A - Ch1, dc in the first st, ch3 (counts as a tr and ch1), tr in same st, [tr, ch1, tr] in next chsp to end, changing colour to yarn B on the last yo of the round which finishes the final tr. (96 tr’s with 48chsp)
Previously
1: A - Ch1, dc in the first st, ch3 (counts as a tr and ch1), tr in same st, [tr, ch1, tr] in next chsp to end, changing colour to yarn B on the last yo of the round which finishes the final htr. (96 tr’s with 48chsp)
AZTEC
Amended 11th Oct 2022
Step 78 should read:
78. A - Slwyif, k10, p5, [k7, p1, (slwyif, p3) x 2, slwyif, k1, slwyif, p1, (slwyif, p3) x 2] x 2, k7, p1, (slwyif, p3) x 2, slwyif, k1, slwyif, p1, k8, p1, slwyif, p3, slwyif, p1, k8, [p1, slwyif, k1, (slwyif, p3) x 2, slwyif, p1, k7, (p3, slwyif) x 2] x 2, p1, slwyif, k1, (slwyif, p3) x 2, slwyif, p1, k7, p5, k10, slwyif.
Previously
78. A - Slwyif, k10, p5, (k7, p1, (slwyif, p3) x 2, slwyif, k1, slwyif, p1, (slwyif, p3) x 2] x 2, k7, p1, (slwyif, p3) x 2, slwyif, k1, slwyif, p1, k8, p1, slwyif, p3, slwyif, p1, k8, [p1, slwyif, k1, (slwyif, p3) x 2, slwyif, p1, k7, (p3, slwyif) x 2] x 2, p1, slwyif, k1, (slwyif, p3) x 2, slwyif, p1, k7, p5, k10, slwyif.
NADIR
Amended 19th Oct 2022
Step 2 should read:
2. Ch2, (tr + dc) in first st, [tr, dc] to last 2st, tr, (dc + tr) in last st. (7st)
Previously
2. Ch2, (tr + dc) in first dc, [tr, dc] to last 2st, tr, (dc + tr) in last st. (7st)
ZENITH
Amended 13th Feb 2024
Pattern has been amended to include more detailed assembly instructions. Please get in touch for an updated pattern if you purchased before this date.